Lot No. ### color


FR 100% Cotton Coveralls

ATPV=11 / CAT2 / 2112

  • 9 ounce twill
  • One chest pocket with pencil stall and flap
  • Tool pocket
  • Sewn throughout with Nomex® thread
  • Heavy duty two-way Nomex® and brass zipper
  • Bar tacks at points of stress
  • One-piece, top-stitched collar
  • Deep pleated bi-swing back for comfort
  • Safety stitched inseams and outseams
  • Two patch hip pockets with flaps
  • Two set-in front pockets
  • Side vent openings
  • Hemmed sleeve cuffs
  • Snaps at top and at neck
Lot No. Color
241CFR9 Navy
COLOR INSEAMS 38 40 42 44 46 48 50 52 54 56 58
Navy Reg – 31″
Tall – 33″

Add 20% for sizes 52 – 58
Add 35% for all non-stock graded sizes regardless of volume.
Add 75% for all custom, made-to-measure sizes regardless of volume.
CASE PACK: 12 (SIZE 38-50) — CASE PACK: 10 (SIZE 52 & UP)

These FR garments are either 100% cotton or 88/12 fabrics treated with gaseous ammonia to impart flame resistant properties. The FR characteristics are permanent, and are for the life of the garment.

Applications include the petrochemical, chemical, oil, and gas industries. They are also appropriate for electrical utilities, welding, flame cutting, and areas involving ferrous metals.

REED® FR Cotton garments should NOT be used around molten white metals such as aluminum, magnesium, or zinc, as these substances will stick to FR cotton. REED® FR Cotton garments should also NOT be worn in areas where static control is a factor, or where contact with strong oxidizers, such as sodium hypochlorite is likely.

REED® FR Cotton garments can be laundered using the normal procedures for 100% cotton. DO NOT USE CHLORINE BLEACH. Repeated use will destroy the flame retardant polymer. Starches and fabric softeners should be avoided as these additives may mask the flame retardant properties.